Let's look at how to improve FreeSync Flickering, which is known to occur mainly on monitor VA panels.
CRU program download
Download the CRU program through the following link.
Run CRU program
Unzip the zip file and run the CRU.exe file.
V rate correction
The initial range is 48 to 144 Hz, but adjust the Max value to 143.
The value may vary depending on the monitor, but just enter a value 1 smaller than the default Max value.
Run the restart.exe file to restart the driver.
If applied properly, the flickering phenomenon will be improved.
If the phenomenon does not improve, you can continue testing by decreasing the Max value by 1 or increasing the Min value by 1.